epoxy self leveling



It is a two-part epoxy compound for use in flooring applications.  It has been specially formulated to provide seamless, truly level floor surfaces with excellent chemical and abrasion resistance.  It can be successfully applied to damp surfaces, but not where there is standing water.  Due to its self-leveling properties to is good at hiding surface imperfections.


  • Find own level on floor – hides surface imperfections
  • Chemical abrasion resistant
  • Solvent free – aids ventilation requirements during application
  • Can be applied to damp surfaces
  • Approved for use in the Nuclear industry – accepted for inclusion in AECP 1002
  • The coating of surfaces for use in the Nuclear industry.


After thorough mixing, estafloor 1000 should be applied by trowel float or special roller at a rate of 2-21/2 sq.m per kit.  This gives an approximate thickness of 2 mm, but a higher thickness may be applied if the surface profile requires it to a maximum of 4-5 mm.  do not apply at temperatures below 5 deg. C.


Resistance to the following substances is extremely good, but in all cases of chemical spillage it is essential that the chemicals be removed as quickly as possible and the surface washed down with water.


related service