Application

the prepared substrate should be wet but free from any excess water prior to application.  Only mix as much CP-SEAL as can be used within 30 minutes when mixing. For brushing consistency, add 3 litres of CP-BOND and 3 litres of water as a mixing liquid to 20 kg. of CP-SEAL.  For trowelling, add 2.5 litres of CP-BOND and 2.5 litres of water to 25 kg. of  CP-SEAL. CP-SEAL should be applied in 2-3 coats depending on water pressure at a rate of 1 kg/m² per coat.  CP-SEAL will be effective after 5 days  from the date of  treatment and has a similar modulus to that of concrete.  It is extremely important that a good bond is achieved between the waterproofer and the substrate and these particular attention should be paid to surface preparation.

Preparation

the substrate should be clean and mechanically sound.  All grease and loose  material  should  be removed completely.

Areas of use

• Externally on buildings to prevent moisture ingress through porous concrete and fine cracks.

• Internally as a coating or render on walls and floors and in basements to stop dampness.

• Suitable for waterproofing and protection of Foundation, Tunnels, Basements, Lift shafts, Retaining walls, Swimming pools, Water tanks, Sewage tanks and any structure that is required to be waterproofed and protected against the ingress of moisture.

Precaution

Keep out of reach of children.  Keep in cool place.  Rubber glove are recommended.   If  in  contact with eyes,  rinse with plenty of water  and  seek medical attention if irritation develops.  If in contact with skin, wash immediately  with soap and water.  If swallowed, do not induce vomiting, drink milk and seek medical attention.

Leak  treatment

all leaks and seepages through the substrate should be treated firstly by using CP-PLUG prior to treatment with CP-SEAL. This is very important as additional water will prevent the correct function of the CP-SEAL. CP-PLUG should be used to stop water jets. 

Coverage

• Externally on buildings to prevent moisture ingress through porous concrete and fine cracks.

• Internally as a coating or render on walls and floors and in basements to stop dampness.

• Suitable for waterproofing and protection of Foundation, Tunnels, Basements, Lift shafts, Retaining walls, Swimming pools, Water tanks, Sewage tanks and any structure that is required to be waterproofed and protected against the ingress of moisture.