CP-grout
is a natural aggregate, high strength, non-shrink material designed specifically for mixing and placing at a damp pack consistency.
Application
- Structural baseplates
- Equipment and machinery
- Anchor bolts
- Precast elements
Areas of use
Surfaces to be grouted should be clean and free from rust, grease or oil. Determine work schedule and method of placing grout, then prepare strong, properly braced and oiled forms to retain the grout and provide relief holes, if needed. attention when necessary.Saturate the area to be grouted with water until it is iformly damp and remove excess water just before placing the grout.If the contractor is not familiar with standard grout placement techniques, a pre-job meeting is suggested to review the project details unique to the particular job.
mixing
Water content will vary depending on temperature and relative humidity, but generally will fall between 3.5 litres per 25 kg bag of CP-GROUT
curing
Proper curing proceduresare important to ensure the grout for 24 hours. Then, cure the grout with a high solids curing compound.
Precaution
Keep out of reach of children. Keep in a cool place. If in contact with eyes, rinse with plenty of water and seek medical attention if irritation develops. If in contact with skin, wash immediately with soap and water. Seek medical attention when necessary.
